CCA is a measurement of the amperage of a 12 Volt battery at 0°F or around – 18°C for 30 seconds and does not drop to 7,2 Volt. The higher the CCA value on the battery, the better the battery will be used to start the engine.
Nano-Gel Technology is the latest Formula specially created in the motor battery to get minimal evaporation and large current.
Smooth Welding & TTP Welding Technology is a welding technique that already uses a machine in the battery manufacturing process so that it produces minimal current resistance.
Self-discharge is a condition where the battery will continue to discharge or dispose of the electric current stored in it even though the battery is not in use or in a no-load state.
Overcharge or overload due to this charging, usually caused by damage to the kiprok or regulator on the motor. So that charging the battery from the bobbin can be excessive and cause the battery to bloat.
A good battery voltage usually varies from 12,8 to 14.4 Volts. When the engine is off, the voltage that should be 12,8 Volts is at 100% battery condition.
Characteristics are usually marked by :
1. The pull of the motor feels heavy
2. Battery voltage is below 12 volts
3. The sound of the horn decreases
4. Speedometer looks dim
No, you can not
1. High CCA capability.
2. Minimal resistance / internal resistance.
3. Greater temperature range.
4. Low Self-discharge.
Yes
Dry
Contact our marketing team at HP / WhatsApp Number 0812 8208 2788
Cover Plate, Cooper Terminal, Battery Container & Cover, Positive & Negative Plate, Epoxy, Safety Valve, Inter-cell Welding Structure, Sealing ring & Glue Sealing, AGM Separator, Reinforcement Fillet.
Nano-Gel Type, Lithium Type, Sodium Ion Type, and Menshine
CCA is a measurement of the amperage of a 12 Volt battery at 0°F or around – 18°C for 30 seconds and does not drop to 7,2 Volt. The higher the CCA value on the battery, the better the battery will be used to start the engine.
Nano-Gel Technology is the latest Formula specially created in the motor battery to get minimal evaporation and large current.
Smooth Welding & TTP Welding Technology is a welding technique that already uses a machine in the battery manufacturing process so that it produces minimal current resistance.
Self-discharge is a condition where the battery will continue to discharge or dispose of the electric current stored in it even though the battery is not in use or in a no-load state.
Overcharge or overload due to this charging, usually caused by damage to the kiprok or regulator on the motor. So that charging the battery from the bobbin can be excessive and cause the battery to bloat.
A good battery voltage usually varies from 12,8 to 14.4 Volts. When the engine is off, the voltage that should be 12,8 Volts is at 100% battery condition.
Characteristics are usually marked by :
1. The pull of the motor feels heavy
2. Battery voltage is below 12 volts
3. The sound of the horn decreases
4. Speedometer looks dim
No, you can not
1. High CCA capability.
2. Minimal resistance / internal resistance.
3. Greater temperature range.
4. Low Self-discharge.
Yes
Dry
Contact our marketing team at HP / WhatsApp Number 0812 8208 2788
Cover Plate, Cooper Terminal, Battery Container & Cover, Positive & Negative Plate, Epoxy, Safety Valve, Inter-cell Welding Structure, Sealing ring & Glue Sealing, AGM Separator, Reinforcement Fillet.
Nano-Gel Type, Lithium Type, Sodium Ion Type, and Menshine
